E7x X5/X6 High-Performance Fuel Pump

W magazynie
Zwykle wysyłka w ciągu 24 godzin
Cena regularna €1.012,49 EUR inc. VAT
Pump Selection:

Masz pytania?
Nie wahaj się skontaktować

Wymienna pompa paliwa niskiego ciśnienia do modeli E7x X5 i X6, przeznaczona do pracy z dowolną mieszanką zawierającą do 100% E85. Fabryczna pompa ogranicza ilość paliwa dostarczanego przez układ, a tym samym moc, niezależnie od pozostałych modyfikacji — szczególnie przy zasilaniu etanolem. Te pompy Walbro w koszu zapewniają ponad dwukrotnie większy przepływ niż fabryczny podzespół, zachowując pełną zgodność z E85. Kosz utrzymuje główną pompę zanurzoną niezależnie od poziomu paliwa w zbiorniku i przeciążeń, dzięki czemu zestaw sprawdzi się zarówno na drodze, jak i na torze. Każdy zestaw jest dostarczany w pełni zmontowany i pasuje bez przeróbek: bez przecinania przewodów, dodatkowego montażu ani kaucji za zwrot starej części.

Stage 2.5 v2 (pojedyncza pompa Walbro 535, ~2,35 L/min)
Obsługuje moc do 675 whp (600 whp przy zasilaniu paliwem 100% E85).

  • Zespół kosza pompy paliwa i górna pokrywa
  • Wstępnie zmontowany z oryginalną pompą Walbro 535 (F90000295)
  • Nowy czujnik poziomu paliwa
  • Nowy filtr paliwa

Stage 3 (dwie pompy Walbro 450)
Obsługuje moc do 900 whp (800 whp przy zasilaniu paliwem 100% E85).

  • Zespół kosza pompy paliwa i górna pokrywa
  • Wstępnie zmontowany z oryginalnymi pompami Walbro 450 (F90000274)
  • Nowy czujnik poziomu paliwa
  • Nowy filtr paliwa
  • Wiązka aktywująca drugą pompę

Oba zestawy są typu plug-and-play i nie wymagają dodatkowego okablowania. Montaż jest na tyle prosty, że można go wykonać w przydomowym garażu.

Pasuje do:

  • BMW X5 (E70) 2006-2013
  • BMW X6 (E71) 2009-2014

Dostępne na zamówienie.
Szacowany czas dostawy do UE: 7–14 dni roboczych.

  • Dostawca Precision Raceworks
Analyze this product with AI

Fuel to Match a Thirsty V8

A big twin-turbo V8 drinks hard when it is worked, and on a tuned car the fuel system is usually the quiet thing that gives out first. A high-performance N63 fuel pump addresses that, replacing the standard supply with one that flows considerably more, so the engine always has the fuel it needs no matter how much boost it is making. It is not a part that shows on a styling list, but it is one of the most important on any serious build, because all the air in the world is useless if the fuel cannot keep pace with it. Owners tend to spend first on the parts they can see and hear, and only later discover that the supply feeding the engine is what was quietly holding the whole thing back.

Where Big Power Meets Its Limit

Fuel demand climbs with power, and the standard pump was only ever sized for the factory output. Push the engine beyond that and the supply starts to fall behind, which is where an uprated X5 and X6 fuel pump earns its place. Keeping the fuel system ahead of demand matters for more than performance; it protects the engine, since a motor that runs short of fuel under boost leans out exactly when it is under the most stress. This pump gives the headroom to make sure that never happens:

  • More volume than the standard unit can deliver
  • Steady supply as boost and demand climb
  • Margin to protect against a lean condition under load
  • The capacity a bigger tune needs to be safe

Room for Boost and Ethanol

The need for a stronger pump grows sharply once a build moves beyond pump fuel. Ethanol blends make good power on a boosted engine, but they ask for noticeably more volume than petrol, so the supply has to grow to match. A pump with real headroom is what makes those tunes possible, delivering the extra fuel they demand without becoming the next bottleneck as the power keeps climbing. Even on pump fuel alone, that same margin is what lets a strong tune run cleanly rather than teetering on the edge of what the standard supply can give. It also leaves the door open for the future, so a car set up for pump fuel today can move to ethanol later without the supply needing to be touched again.

Made for the E70 and E71

This pump is designed for the N63-powered X5 and X6 of this generation, so it fits the factory location and connects cleanly rather than being adapted to suit. An E70 X5 fuel pump of this kind drops in where the original sat, and the same part serves the closely related X6, since the two share the engine and the fuel system around it. That shared design means the part is well proven rather than a one-off, which is reassuring on a component the whole build depends on. Confirm your exact model and year before ordering, since details vary across the range. As with any supply upgrade, it must be enabled in the tune and checked on a datalog before the car is pushed hard, so the extra capacity is actually used and the fuelling stays safe under full load.

FAQ

Which X5/X6 engine does this pump suit?
The E7x X5 and X6 came with petrol and diesel engines that use different pumps. Confirm your exact engine so the pump matches.
Is it the high-pressure or the in-tank pump for the E7x?
These cars use both an in-tank low-pressure pump and an engine high-pressure pump. Identify which one you need, since they are different parts.
Does the heavier SUV fuel system differ from a saloon's?
An SUV can use a larger tank and different plumbing, though the pump role is the same. Confirm the part is listed for your exact X5 or X6.
Does a V8 X5/X6 need a different pump setup than the six?
A twin-turbo V8 has higher fuel demand and can use a different pump arrangement than a six. Match the pump to your specific engine configuration.
Does fitting it need coding or adaptation?
Some installs run as a direct swap, while others expect the system to relearn the new pump. Plan for diagnostic software so it runs correctly.
Is upgrading the pump needed for a tuned E7x?
A stock pump copes at factory power, so the upgrade mainly suits tuned builds. It matters once you raise power beyond what the standard pump supplies.