Domov » BMW 1 Series fuel pump » E9x / E8x In-Tank Fuel Filter & Regulator (V2)
Precision Raceworks

E9x / E8x In-Tank Fuel Filter & Regulator (V2)

(0)
Na zalogi
Običajno odprema v 24 urah
€922,49 EUR inc. VAT
Regulator Choice:

Imate vprašanja?
Brez zadržkov se obrnite na nas

Ena sama črpalka v rezervoarju, ki združuje največji pretok, manjši tok in regulacijo tlaka goriva ter deluje z vsem od nizkokakovostnega bencina za črpalke do eksotičnih dirkalnih goriv. V2 neposredno zamenja omejevalni tovarniški filter/regulator, največje ozko grlo v sistemu za gorivo E8x/E9x.

Povečanje pretoka:

  • Za sisteme z eno črpalko: +37 % pretoka pri 72 psi; za sisteme z dvema črpalkama: +43 %
  • Z izbirnim regulatorjem v motornem prostoru se pretok skoraj podvoji: ena črpalka Walbro 450 se po zmogljivosti izenači s tradicionalnim sistemom dveh črpalk 450 v originalni enoti
  • Manjši tok podaljša življenjsko dobo krmilnika črpalke EKP (tovarniškega krmilnika črpalke): prihranek približno 2,5 A v primerjavi z eno črpalko 450 v originalni enoti

Tehnični podatki:

  • Material: eloksiran aluminij, v celoti izdelan iz masivnega bloka (brez plastike, ki bi lahko počila)
  • Združljivost z gorivi: vsa goriva
  • Filter: 10-mikronski iz mikro stekla, zamenljiv (izdelan v ZDA)
  • Regulator: 5 bar (72 psi) 1:1, standardna namestitev pri rezervoarju, po želji namestitev v motornem prostoru
  • Cevi za gorivo: niso potrebne, deluje z vsemi cevmi, ki se priključijo na originalno enoto (združljivo z AN6 ORB)

Možnosti regulatorja:

  • 5 bar v rezervoarju: regulator ostane v rezervoarju, najpreprostejša namestitev, funkcija 1:1 je izbirna
  • Brez regulatorja: preklopi na povratni priključek, da uporabite svojega (AN6 ORB)
  • Mikroregulator 5 bar statični: privije se v cev za gorivo z vbrizgavanjem v sesalni kanal, zagotavlja večji pretok in stabilnejši tlak
  • Nastavljivo razmerje 1:1: pritrdi se na visokotlačno črpalko za gorivo (HPFP) v slogu N54, za sisteme, ki potrebujejo tlak nad ali pod 5 bar

Združljivost z vozili:

  • BMW serije 1 M (2011)
  • BMW 128i / 135i (2008 do 2013), 135is (2013)
  • BMW 323i (2007 do 2011)
  • BMW 325i / 325xi (2006)
  • BMW 328i (2007 do 2013), 328i xDrive (2009 do 2013), 328xi (2007 do 2008)
  • BMW 330i / 330xi (2006)
  • BMW 335i (2007 do 2013), 335i xDrive (2009 do 2011), 335is (2011 do 2013), 335xi (2007 do 2008)
  • BMW X1 (2012 do 2015)

Predviden čas dostave v EU: 7–14 delovnih dni.
  • Prodajalec Precision Raceworks

Product Use & Compliance

Analyze this product with AI

Clean Fuel at the Right Pressure

Two small jobs quietly keep a fuel system healthy: filtering the fuel and holding it at the correct pressure. This in-tank unit does both, combining them in one serviceable part. A fresh N54 fuel filter and regulator of this kind keeps dirt out of the injection system and the pressure where it belongs, which matters more than most owners realise, since a clogged or failing original can rob the engine of clean, well-regulated fuel long before anything obvious goes wrong.

Two Jobs in One Unit

The neat part is that it handles both tasks together. An E90 fuel pressure regulator built into the same assembly as the filter means one part keeps the fuel clean and holds the supply pressure steady, rather than two separate items to source and fit. It is a tidy, sensible piece of design that simplifies maintenance while making sure neither job is neglected.

Keeping the Fuel Clean

Filtration is the first line of defence for the injection system. A quality E90 fuel filter traps the grit and debris that would otherwise reach the high-pressure pump and injectors, protecting expensive components from wear. Over time, the original clogs and restricts flow, so fitting a fresh one restores proper supply and removes a hidden limit that can quietly hold the fuelling back.

Holding the Right Pressure

Pressure is the other half of the job. A healthy N54 fuel pressure regulator keeps the supply at the pressure the system expects, so the fuelling stays accurate and consistent. A worn or failing regulator lets pressure wander, which upsets how the engine runs, so a fresh, correctly specified unit is quietly important to keeping everything working as it should.

A Smart Combined Design

Fitting both functions in one in-tank part makes ownership simpler. A BMW E90 fuel filter and regulator together as a single serviceable unit means one job rather than two, and one quality part looking after both filtration and pressure. It is the sort of upgrade that pays for itself in reliability, removing a pair of quiet failure points in a single, straightforward fitment.

Especially Worth It on a Tuned Car

The harder the engine works, the more this matters. On a tuned car asking more of its fuel system, a fresh 335i fuel filter and regulator keep the supply clean and steady when the demand is highest, so the fuelling can do its job under load. It is cheap insurance against a tired component undermining the more expensive hardware around it, and a sensible thing to refresh as part of any serious build.

Fits the E9x and E8x N54

This V2 unit is designed for the N54-powered E9x and E8x cars, so a BMW N54 fuel filter and regulator of this kind fits the factory location and connects cleanly rather than being adapted to suit. Confirm your exact model and year before ordering, and it will drop straight in, restoring clean fuel at the right pressure and taking a pair of quiet weak points out of the system for good.