Dorch DE70 Injectors for B58 Gen 1 – 70% Upgrade for All B58 Gen 1 Engines
Couldn't load pickup availability
Got questions?
Feel free to get in touch
Disclaimer, read carefully!
Unless explicitly stated otherwise, all products sold by TunePoint EU are designated RACE ONLY and are solely for competition or off-road use limited to racing formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, may violate local, state, and Federal laws. TunePoint EU does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the responsibility of the consumer.
It is the responsibility of the customer to check with all federal, state local and environmental laws before ordering and installing a product. TunePoint EU Limited is not responsible for any fees, fines or costs that a customer may incur as a result of failing to check with federal, state, local or environmental laws before ordering and installing a product.
The DE70 injectors from Dorch Engineering introduce a completely new solution for upgrading the fuel system on BMW B58 Gen 1 engines. Instead of modifying existing factory components, Dorch Engineering and Stanadyne created a dedicated direct injection system designed specifically for high-performance applications, increased power levels, and ethanol-based fuels.
Manufactured according to OEM Tier 1 standards, the DE70 combines significantly increased fuel flow capacity with the precision, reliability, and refinement expected from a factory-style fuel system.
Designed Around Performance
Every internal component of the DE70 injector was developed from the ground up to improve fuel delivery rather than adapting an existing OEM injector design. This approach allows the system to provide substantially higher flow capacity while maintaining stable idle characteristics, smooth cold starts, and predictable operation during everyday driving.
The advanced internal construction also improves long-term durability when operating with ethanol blends such as E50 and E85, making these injectors ideal for high-performance B58 applications.
Fueling Capability
Compared with the original factory injectors, the DE70 delivers up to 70% greater flow capacity and can support more than 100% additional engine power potential when paired with the correct fuel system components and ECU calibration.
Estimated fueling capacity:
| Fuel Type | OEM | DE70 |
|---|---|---|
| Gasoline | 675 WHP | 1050 WHP |
| E50 | 600 WHP | 900 WHP |
| E85 | 520 WHP | 800 WHP |
| Flow Rate at 200 bar | 900 cc | 1550 cc |
Actual power capability depends on turbocharger selection, engine configuration, fuel quality, and ECU calibration.
The increased capacity of these B58 injectors makes them suitable for demanding builds requiring significantly more fuel volume than the factory system can provide.
Product Highlights
- Up to 70% greater injector flow compared with OEM units
- Supports over 100% additional power potential
- Designed specifically for E50 and E85 fuel applications
- Optimized injector dynamics and spray pattern
- Direct plug-and-play installation
- Manufactured to OEM Tier 1 quality standards
- Lifetime warranty coverage
ECU Calibration
Due to the increased injector flow characteristics, a dedicated ECU calibration for the DE70 injectors is required before operating the vehicle.
Supported tuning platforms include:
- Bootmod3
- MHD
- MG Flasher
Custom ECU calibrations are also available for vehicles requiring a specifically tailored configuration.
Supported Vehicles
Compatible exclusively with BMW B58 Gen 1 engines produced through 2019:
- F20/F21 140i / 140xi
- F22/F23 240i / 240xi
- F30/F31/F34 340i / 340xi
- F32/F33/F36 440i / 440xi
- G30/G31 540i / 540xi
- G32 640i / 640xi
- G11/G12 740i / 740xi
- G01 X3 M40i
- G02 X4 M40i
These injectors are not compatible with B58 Gen 2 engines introduced from 2020 onward.
For enthusiasts searching for reliable BMW B58 injectors, the DE70 provides a dedicated high-flow solution engineered specifically for increased horsepower applications.
Why Select the DE70?
The DE70 was developed for drivers who have exceeded the limitations of the original fuel injectors and require a true performance-oriented upgrade.
With significantly increased flow capacity, OEM-level manufacturing standards, ethanol compatibility, and precise fuel control, these B58 fuel injectors provide the additional fueling headroom required for serious B58 power builds while maintaining smooth operation and everyday drivability.