High-Flow Downpipes (200-Cell) Compatible with BMW G80, G81, G82, G83, G87 (M2, M3, M4) with S58 Engine

En stock
Expédié généralement sous 24 heures
Prix régulier €1.259,99 EUR inc. VAT

Des questions ?
N’hésitez pas à nous contacter

Une configuration FBO (Full Bolt On) complète nécessite une descente de turbo optimisée pour le débit, ainsi qu’un intercooler plus grand, des conduites de suralimentation robustes et une cartographie adaptée. L’augmentation de la pression de suralimentation accroît le volume et la température des gaz d’échappement, ce qui sollicite tous les composants du moteur. La solution consiste à remplacer la descente de turbo (le tuyau situé juste derrière les turbos). Contrairement au S55 précédent, le S58 n’a pas de catalyseurs métalliques dans ses descentes de turbo : une amélioration est donc intéressante même à des niveaux de puissance modérés.

Ces descentes de turbo à haut débit, équipées de catalyseurs de 200 cellules, réduisent la contre-pression et soulagent les turbos, tandis que les catalyseurs d’origine sous le plancher contribuent toujours au respect des valeurs d’émissions (Australie) (sans garantie).

Caractéristiques :

  • Acier inoxydable à haut débit, avec une sortie de 88,9 mm au niveau du turbo
  • Catalyseurs de 200 cellules dans les descentes de turbo
  • Compatible avec tous les modèles G8X M2, M3 et M4

Contenu de la boîte : 2 descentes de turbo selon la configuration choisie, matériel de montage.

Remarque : la suppression du système d’origine annule l’homologation pour la circulation routière. Produit réservé à la compétition automobile.

Compatibilité avec les véhicules :

  • BMW G80 / G81 M3
  • BMW G82 / G83 M4
  • BMW G87 M2

Délai de livraison estimé dans l’UE : 7-14 jours ouvrables.

  • Vendeur TunePoint Europe
Analyze this product with AI

Unleashing the S58 Without Breaking the Rules

The S58 is built to breathe hard, yet the factory exhaust holds it back with a dense, restrictive section right behind the turbos. A high-flow downpipe clears that away and replaces it with a far freer path, waking the engine up while keeping a catalyst in place so the car stays suitable for the road. For the many owners who want serious flow but still drive the car every day, it is the upgrade that delivers the gain without the drawbacks of going fully catless.

The Factory Choke Point

The restriction sits in the first section after the turbos, where the standard pipe is narrow and carries a dense, fine catalyst. That combination is the single biggest obstruction in the exhaust, and it is exactly what a 200 cell downpipe addresses. By opening the bore and fitting a far coarser, freer-flowing cat, it lets the back pressure that crowds the turbos fall away, so the engine can finally exhale as hard as it draws in. Everything further back in the exhaust can only flow as well as this section allows, which is why addressing it does more than any change to the silencer or tailpipe down the car.

A Cat That Actually Flows

The clever part is the catalyst itself. A sports cat downpipe uses a high-flow core that passes far more gas than the factory unit while still cleaning the exhaust, so you keep emissions control without the restriction. It is the detail that lets this pipe flow strongly and stay road-friendly at once, giving most of what a catless design offers while remaining a sensible choice for a car that sees regular road use.

Kept Road-Friendly

This is where it earns its place for everyday owners. A BMW catted downpipe keeps a working catalyst, so it is far better suited to road use, inspection, and ownership than a pipe with the cats stripped out. You gain the freer breathing, the sharper response, and a fuller exhaust note, while avoiding the compromises that come with removing emissions equipment altogether, which is why it is the pragmatic choice for a daily-driven M car. It also tends to keep exhaust drone and warning lights in check far better than a catless pipe, so the car stays as civilised day to day as it is quick when you press on.

Across the M Range

Because the engine is shared, one design covers the family. A G80 M3 catted downpipe of this kind suits the related M2 and M4 just as well, since they run the same S58 and layout, and it is a direct fit in the factory location with nothing to cut or fabricate. Confirm your exact model and year before ordering, and plan for the car to be set up correctly afterwards, so it makes the most of the freer exhaust from the first drive. Fitted and mapped properly, it transforms how the engine breathes while keeping the car honest on the road, which is a rare and genuinely useful combination on a performance car you actually drive every day.